Speed Humps

Speed bump (speed hump, road hump, speed breaker, sleeping policeman,) is a speed-reducing feature of road design to slow traffic or reduce through traffic. Our speed hump is a bump in a roadway with heights typically ranging between 2and 3 inches. The length of road bumps are typically less than or near to 1 foot (30 cm); whereas road humps are longer and are typically 10 to 14 feet (3.0 to 4.3 m) in length.
The use of speed bumps is widespread around the world, and they are most commonly found where vehicle speeds are mandated to be low. Because speed bumps are very effective in keeping vehicle speed down.
Advantages of speed hump:
They are relatively inexpensive
They are relatively easy for bicycles to cross if designed appropriately
They are very effective in slowing travel speeds.
Speed Humps are good for locations where very low speeds are desired and reasonable, and noise and fumes are not a major concern.

Item  Speed bump
 Description
 
Model number:
 ST-SH-07
 
Keywords:      
 Speed hump, speed bump, rubber speed hump, rubber speed bump
 
Working life
 >2 years
 
Compression resistance
 >200mpa
 
Characteristics
 1. widely used, one of the newest traffic safe  productions , a good helper of the manager
 
2. specialized designed, notable decelerate effect, without noise and uncomfortable feeling
 
3. set up flexibly according the request of the customer, convenient installment
 
4. black and yellow, affect in day and night, attack the attention of the drivers to decelerate successfully
 
5. high intensity rubber, firm and useful, good anti-impact ability
 
Usage:* Mainly used for city intersection, highroad crossing, toll gate,
garden, village, parking lot, and gas station, etc.
1. fixer for asphalt roads : expansive screw  (standard parts, the customer
can easily purchase on local market);
2. To improve life span, the road must be smooth. After drilling, clean
Up the holes and remove the dust, oil and debris from the holes.
Using the special adhesive, put the bottom of the bump to the surface of the road
3. Speed bumps can be installed on the surface of asphalt roads and concrete roads
4. For A type road bumps, use a steel bar or PVC pipe to link them up from the middle
5. The fixer and the hole must be matched in size